Cisco is introducing a feature in IOS XE called Insecure Mode, and the name can sound a little alarming. Why would anyone intentionally place a production router or switch into an insecure mode?
The answer is more nuanced than the name suggests. Cisco is not asking administrators to disable a router’s entire security framework. Instead, it’s rolling out a mechanism to identify, restrict, and eventually remove legacy configurations that no longer meet its security standards.
Why Cisco Is Making This Change
Enterprise network operating systems have accumulated protocols and features that were once commonplace but now present avoidable security risks. Examples include unencrypted file transfers, older SNMP versions, and unencrypted web management. The exact warning and restriction status of each feature depends on the software release.
Instead of removing everything in a single release and potentially disrupting production networks, Cisco is following a phased approach as part of its Resilient Infrastructure initiative.
The distinction that matters
Finding an insecure configuration is not the same as enabling Insecure Mode. The first is a security assessment; the second explicitly permits certain restricted legacy configurations.
How the Rollout Works
| Stage | IOS XE milestone | What changes |
|---|---|---|
| 1. Warning | 17.18.2 | IOS XE begins issuing warnings for designated insecure configurations, without requiring Insecure Mode. |
| 2. Restriction | 26.1.1 | New or factory-default deployments block designated restricted configurations unless an administrator explicitly enables Insecure Mode. |
| 3. Removal | Feature-dependent | Selected obsolete features are removed in later releases; the timing varies by feature and platform. |
Not all features advance through these stages together. Some warning-only features may never require Insecure Mode and may move directly to removal.
Checking Your Router for Insecure Configurations
Cisco provides several operational commands to inspect the device’s security posture and the restrictions known to its installed software.
Display currently configured features that match Restriction-phase rules:
show system insecure configuration
List the Restriction-phase configuration patterns tracked by the installed release:
show system insecure profile
Check whether the device is in Secure or Insecure Mode (26.1.1 and later):
show system security mode
Request an immediate rescan instead of waiting for the scheduled scan:
test system secure all
Important: show system insecure configuration reports applicable Restriction-phase configurations. It does not give you a complete audit of every security weakness, and warning-only configurations may appear in syslog rather than in that command’s output.
IOS XE 17.18.2 supports proactive detection and warning. The actual Secure/Insecure Mode enforcement begins with IOS XE 26.1.1.
What Does system mode insecure Do?
In IOS XE 26.1.1 and later, a new or factory-default device starts in Secure Mode. If someone attempts to enter a configuration classified as restricted, IOS XE rejects it.
For organizations that still depend on a restricted legacy feature, an administrator can deliberately allow it:
configure terminal
system mode insecure
This allows Restriction-phase commands to be configured while continuing to generate security warnings.
Insecure Mode does not globally disable all device security protections. It does, however, permit the use of configurations Cisco has identified as risky. Treat it as a controlled compatibility exception, not as a recommended steady-state setting.
What Happens During an Upgrade?
This is particularly important in enterprise networks. If you upgrade an existing device to a release that enforces restrictions and the configuration already contains a designated restricted feature, IOS XE is designed to automatically enter Insecure Mode to preserve that feature’s operation.
The system mode insecure line then appears in the configuration. Cisco’s intent is to avoid a network outage caused by silently disabling existing services during a software upgrade.
That behavior is operationally sensible, but it doesn’t mean the flagged configurations should be ignored. It gives the engineering team time to remediate them intentionally.
Returning to Secure Mode
Once all applicable restricted configurations are removed, administrators can return to Secure Mode:
configure terminal
no system mode insecure
Cisco requires the insecure-configuration scan to finish and the relevant restricted configurations to be removed before accepting the transition. After remediation, test system secure all can refresh the results without waiting for the next scheduled scan, which may otherwise take up to 30 minutes.
My Take: Security Without Unnecessary Complexity
I’ve always preferred network designs that are simple, consistent, and easy to troubleshoot. Security practices should follow the same philosophy.
Cisco’s phased approach makes sense because it gives network teams visibility into legacy dependencies without forcing potentially disruptive changes overnight. But I wouldn’t enable Insecure Mode simply because the option exists.
- Review your configurations and IOS XE warnings before major upgrades.
- Identify the legacy features still in use and which ones are actually restricted.
- Replace insecure dependencies with supported, secure alternatives wherever practical.
- Document any unavoidable exceptions, their owners, and a remediation plan.
- Return the device to Secure Mode once those exceptions are eliminated.
This reframes the discussion between networking and security teams. Rather than asking, “Why are we putting a router into insecure mode?”, ask: “Which legacy configurations do we need to eliminate before the next upgrade?”
Final Thoughts
The name Insecure Mode can make this change sound more alarming than it is. Cisco is moving toward a secure-by-default approach and making the continued use of certain legacy features an explicit administrative decision.
The goal isn’t to operate in Insecure Mode forever. It’s to understand what Cisco is flagging, preserve stability during transitions, and remove those insecure dependencies on a planned schedule.
Read More: Official Cisco Documentation
- Cisco: Insecure Feature Restrictions on IOS XE — overview, operating behavior, and command reference.
- Cisco: Understand Resilient Infrastructure on IOS XE Devices — CLI examples, scans, syslog messages, and upgrade considerations.
- Cisco: Feature Deprecation and Restriction Details — feature-specific phase and release tracking.